|
Tubular
Skylights
Enjoy the brilliance of Solar Lighting in any dark room of your
home, office and industry.
Out models are designed to be low profile for great appearance
and are made with the concern of meeting building codes for
the homeowner's peace of mind.
Special Features |
 |
Aluminum
Flashing:
Seamless made from 1100 series aluminum, .080" thick. 4" wide
base all around to seal securely onto the roof. Made for sloped/pitched
roofs to a minimum of 4" and for flat roofs, up to 10" tall.
Manufactured as one-piece to meet with water, snow and fire
codes. Can be spray-painted to coincide with roof's color. |
 |
 |
Acrylic
Dome:
Vacuum-formed and made of .220" thick high-impact acrylic with
UV stabilizers, mounted on an aluminum trim ring. Dome assembly
is engineered to eliminate heat and moisture. |
Reflective
Tube:
Top quality MiroSilver, anodized aluminum with a 98% reflection,
rolled to our 5 different skylight diameters.
|
 |
 |
Trim/Decorative
Ring:
Made of 1100 series, .050" or .063" thick, aluminum. Trim ring
is mounted to ceiling. Powder-coated decorative ring twists
on and off to trim ring to hold diffuser.
Diffuser:
Made of .100" thick high impact acrylic. Choice of flat or domed,
White, Prismatic or MaxLum. |
Aluminum
Skirt:
Used on tile roofs for extra protection against any leakage.
Skirt is glued to an EPDM shroud fitted over base flashing.
Aluminum is contoured to tiles leaving a watertight closing. |
Flashing
Extension:
Made of 5052 H-32 aluminum, .080" thick. Manufactured to a 24"
height to rise dome above swap coolers or roof walls.
|
 |
| Approximate
Coverage Area for Tubular Skylights |
| 10"
Approx. 150 Sq. ft. |
13"
Approx. 250 Sq. ft. |
18"
Approx. 400 Sq. ft. |
21"
Approx. 500 Sq. ft. |
24"
Approx. 600 Sq. ft. |
| Skylight
Optional Accessories |
| Equipped
with an RV150 Exhaust Ventilation Fan Motor, white powder-coated
aluminum cowl vent and decorative rings. These fan can only
be installed on a 10" tubular skylight. |
| Twist-on
flourescent or incandescent light kit installed inside tubular
skylight for night time use. |
| Aluminum
damper installed inside tubular skylight. Non-electric and can
be adjusted manually to desired illumination. 2' Wand included. |
| Dimmer
works similar to Mechanical Dimmer. Wireless wall remote is
installed to control dimmer. Electrical wiring is done near
dimmer inside attic. Optimal for taller ceilings. |
Elite is proud to offer the Solar Powered Attic Fan and Garage
Ventilator, specially designed and engineered to move up to
800 CFM of hot air from the attic or garage. One unit is capable
of covering an attic space of up to 1200 square feet (depending
on height of attic). |
Aluminum Flashing & Top Panel:
Made from 1100 series, .080' thick, aluminum, powder-coated black.
Solar Panel: 10-Watt Photovoltaic Module with 10 yr. warranty.
Fan
Motor: 38.2 VDC brush style Pittman motor. Formulated with
soundless ventilation with a 5 yr. warranty.
Flashing Adaptor: Used for Elite performance in air-flow. |
 |
 |
Louver
Ring: Made from 1100 Series, .080" thick, aluminum. Engineered
to allow maximum amount of airflow but small enough to keep
the critters out.
Aluminum Skirt: Supplied for tile roofs. EPDM shroud
is fitted over tiles leaving a secure closing. |
|
Thermostat: As an option, a thermostat preset at approximately
85°F can be purchased. |
 |
|
Flex Tubing: For Garage Ventilator, allows air-flow from
garage out through roof. |
|
Inlet
Vent Ring: Mounted on garage ceiling where hot air and fumes
are vacuumed out. |
 |
|
 |
|
|
 |
|
|
